keepalived+nginx高可用实现方法示例
1.keepalived介绍keepalived最初是专为LVS负载均衡软件设计的，用来管理并监控LVS集群系统中各个服务节点的状态，后来又加入了实现高可用的VRRP功能。keepalived除了能够管理LVS软件外，还能支持其他服务的高可用解决方案。
keepalived通过VRRP协议实现高可用功能的。VRRP（Virtual Router Redundancy Protocol）虚拟路由冗余协议。VRRP出现的目的就是为了解决静态路由单点故障问题，它能保证当个别节点宕机时，整个网络可以不间断地运行。
2.keepalived高可用故障转移原理
keepalived高可用服务之间的故障转移，是通过VRRP来实现的。在keepalived服务工作时，主Master节点会不断地向备节点发送（多播的方式）心跳消息，用来告诉备Backup节点自己还活着。
当主节点发生故障时，无法给备节点发送心跳消息，如果备节点无法继续检测到来自主节点的心跳。就会调用自身的接管程序，接管主节点的IP资源和服务。当主节点恢复时，备节点又会释放主节点故障时自身接管的IP资源和服务，恢复到原来的备用角色
3.安装nginx
3.1.主节点（192.168.80.22）
3.1.1.安装编译工具和库文件
yum -y install make zlib zlib-devel gcc-c++ libtool openssl openssl-devel
3.1.2.安装pcre
#进入目录
cd /usr/local/develop/anginx
#上传安装文件并解压
tar -zxvf pcre-8.38.tar.gz
#进入安装目录
cd pcre-8.38
#检查配置
./configure
#编译、安装
make && make install
#查看pcre版本
pcre-config --version
3.1.3.安装nginx
#进入目录
cd /usr/local/develop/anginx
#上传安装文件，并解压
tar -zxvf nginx-1.8.1.tar.gz
#进入安装目录
cd nginx-1.8.1
#检查配置
./configure --prefix=/usr/local/develop/anginx/webserver/nginx --with-http_stub_status_module --with-http_ssl_module --with-pcre=/usr/local/develop/anginx/pcre-8.38
#编译安装
make && make install
#查看nginx版本
/usr/local/develop/anginx/webserver/nginx/sbin/nginx -v
--------------------------------------------------------
# /usr/local/develop/anginx/webserver/nginx/sbin/nginx -v
nginx version: nginx/1.8.1
#配置nginx（检查）
/usr/local/develop/anginx/webserver/nginx/sbin/nginx -t
#nginx管理命令
/usr/local/develop/anginx/webserver/nginx/sbin/nginx # 启动 Nginx
/usr/local/develop/anginx/webserver/nginx/sbin/nginx -s stop # 停止 Nginx
/usr/local/develop/anginx/webserver/nginx/sbin/nginx -s reload # 重新载入配置文件
/usr/local/develop/anginx/webserver/nginx/sbin/nginx -s reopen # 重启 Nginx
3.1.4.nginx基础配置
vi nginx.conf
#user nobody;
worker_processes 1;
#error_log logs/error.log;
#error_log logs/error.log notice;
#error_log logs/error.log info;
pid logs/nginx.pid;
events {
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
log_format main '$remote_addr - $remote_user [$time_local] "$request" '
'$status $body_bytes_sent "$http_referer" '
'"$http_user_agent" "$http_x_forwarded_for"';
access_log logs/access.log main;
sendfile on;
#tcp_nopush on;
#keepalive_timeout 0;
keepalive_timeout 65;
#gzip on;
#添加tomcat列表，真实应用服务器都放在这
upstream tomcat_pool{
#server tomcat地址:端口号 weight表示权值，权值越大，被分配的几率越大;
server 192.168.80.22:8080 weight=4 max_fails=2 fail_timeout=30s;
server 192.168.80.22:8081 weight=4 max_fails=2 fail_timeout=30s;
}
server {
listen 80;
server_name tomcat_pool;
#charset koi8-r;
#access_log logs/host.access.log main;
location / {
#roothtml;
#index index.html index.htm;
proxy_pass http://tomcat_pool;#转向tomcat处理
proxy_set_headerHost $host;
proxy_set_headerX-Real-IP $remote_addr;
proxy_set_headerX-Forwarded-For $proxy_add_x_forwarded_for;
}
#error_page 404 /404.html;
# redirect server error pages to the static page /50x.html
#
error_page500 502 503 504 /50x.html;
location = /50x.html {
roothtml;
}
}
3.2.备节点（192.168.80.21）
说明：安装方式同nginx主节点。
4.安装keepalived
4.1.主节点（192.168.80.22）
#安装keepalived
yum install keepalived -y
#启动keepalived服务
/etc/init.d/keepalived start
-------------------------------------------
# /etc/init.d/keepalived start
正在启动 keepalived： [确定]
# ps -ef |grep keepalived
root 15723 1 0 00:59 ? 00:00:00 /usr/sbin/keepalived -D
root 15724 15723 0 00:59 ? 00:00:00 /usr/sbin/keepalived -D
root 15725 15723 0 00:59 ? 00:00:00 /usr/sbin/keepalived -D
root 15731 15622 0 00:59 pts/100:00:00 grep keepalived
#
#设置开机自启动
echo "/etc/init.d/keepalived start" >>/etc/rc.local
#关闭keepalived服务
/etc/init.d/keepalived stop
#编辑keepalived配置文件
vi /etc/keepalived/keepalived.conf
-----------------------------------------------------------
! Configuration File for keepalived
global_defs {
notification_email {
acassen@firewall.loc
failover@firewall.loc
sysadmin@firewall.loc
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id lb01
}
vrrp_instance VI_1 {
state MASTER
interface eth1
virtual_router_id 55
priority 150
advert_int 1
authentication {
auth_type PASS
auth_pass server123
}
virtual_ipaddress {
192.168.80.100 dev eth1 label eth1:1
}
}
...........................................................
关于配置说明：
[*] 【router_id】 是路由标识，在一个局域网里面应该是唯一的
[*]【vrrp_instance VI_1】{...}这是一个VRRP实例，里面定义了keepalived的主备状态、接口、优先级、认证和IP信息
[*]【state】 定义了VRRP的角色
[*]【interface】定义使用的接口，这里我的服务器用的网卡都是eth1
[*]【virtual_router_id】是虚拟路由ID标识，一组的keepalived配置中主备都是设置一致
[*]【priority】是优先级，数字越大，优先级越大，
[*]【auth_type】是认证方式
[*]【auth_pass】是认证的密码
[*]【virtual_ipaddress】 ｛...｝定义虚拟IP地址，可以配置多个IP地址，这里我定义为192.168.80.100，绑定了eth1的网络接口，虚拟接口eth1:1
4.2.备节点（192.168.80.21）
#安装keepalived
yum install keepalived -y
#启动keepalived服务
/etc/init.d/keepalived start
-------------------------------------------
# /etc/init.d/keepalived start
正在启动 keepalived： [确定]
# ps -ef |grep keepalived
root 15723 1 0 00:59 ? 00:00:00 /usr/sbin/keepalived -D
root 15724 15723 0 00:59 ? 00:00:00 /usr/sbin/keepalived -D
root 15725 15723 0 00:59 ? 00:00:00 /usr/sbin/keepalived -D
root 15731 15622 0 00:59 pts/100:00:00 grep keepalived
#
#设置开机自启动
echo "/etc/init.d/keepalived start" >>/etc/rc.local
#关闭keepalived服务
/etc/init.d/keepalived stop
#编辑keepalived配置文件
vi /etc/keepalived/keepalived.conf
-----------------------------------------------------------------
! Configuration File for keepalived
global_defs {
notification_email {
acassen@firewall.loc
failover@firewall.loc
sysadmin@firewall.loc
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id lb02
}
vrrp_instance VI_1 {
state BACKUP
interface eth1
virtual_router_id 55
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass server123
}
virtual_ipaddress {
192.168.80.100 dev eth1 label eth1:1
}
}
.............................................................
5.测试
5.1.启动主备节点的keepalived服务
#在节点一执行（192.168.80.22）
/etc/init.d/keepalived start
-------------------------------------
# ps -ef |grep keepalived
root 15788 1 0 01:09 ? 00:00:00 /usr/sbin/keepalived -D
root 15790 15788 0 01:09 ? 00:00:00 /usr/sbin/keepalived -D
root 15791 15788 0 01:09 ? 00:00:00 /usr/sbin/keepalived -D
root 15807 15622 0 01:33 pts/100:00:00 grep keepalived
#
#在节点二执行（192.168.80.21）
/etc/init.d/keepalived start
---------------------------------------
# ps -ef |grep keepalived
root 11542 1 0 01:30 ? 00:00:00 /usr/sbin/keepalived -D
root 11544 11542 0 01:30 ? 00:00:00 /usr/sbin/keepalived -D
root 11545 11542 0 01:30 ? 00:00:00 /usr/sbin/keepalived -D
root 11550 11512 0 01:33 pts/100:00:00 grep keepalived
#
5.2.通过虚ip访问服务
http://192.168.80.100/session-redis-demo/
5.3.停止主节点keepalived服务
#在节点一执行（192.168.80.22）
/etc/init.d/keepalived stop
#观察备节点变化
ip addr
-------------------------------------------
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:50:56:38:e5:46 brd ff:ff:ff:ff:ff:ff
inet 192.168.80.21/24 brd 192.168.80.255 scope global eth1
inet 192.168.80.100/32 scope global eth1:1
inet6 fe80::250:56ff:fe38:e546/64 scope link
valid_lft forever preferred_lft forever
#
5.4.继续通过虚ip访问服务
http://192.168.80.100/session-redis-demo/
6.keepalived+nginx整合
说明：编写nginx守护脚本，如果nginx服务出现故障，则停止当前节点的keepalived服务。自动切换到备用节点。
6.1.编写nginx守护脚本
vi nginx_check.sh
--------------------------------------
#!/bin/bash
while true
do
if [ $(netstat -tlnp|grep nginx|wc -l) -ne 1 ]
then
/etc/init.d/keepalived stop
fi
sleep 2
done
#给脚本授权
chmod u+x nginx_check.sh
#执行脚本
nohup /usr/local/develop/anginx/shell/nginx_check.sh &
6.2.停止主节点nginx服务
#停止主节点nginx服务
/usr/local/develop/anginx/webserver/nginx/sbin/nginx -s stop
#查找进程
# ps -ef |grep nginx
root 15915 1 0 01:51 ? 00:00:00 /bin/bash /usr/local/develop/anginx/shell/nginx_check.sh
root 16516 15753 0 01:54 pts/500:00:00 grep nginx
#
#观察备用节点变化【服务正常】
ip addr
--------------------------------------
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:50:56:38:e5:46 brd ff:ff:ff:ff:ff:ff
inet 192.168.80.21/24 brd 192.168.80.255 scope global eth1
inet 192.168.80.100/32 scope global eth1:1
inet6 fe80::250:56ff:fe38:e546/64 scope link
valid_lft forever preferred_lft forever
#
#再次重新启动主节点nginx和keepalived服务
/usr/local/develop/anginx/webserver/nginx/sbin/nginx
/etc/init.d/keepalived start
以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持服务器之家。
原文链接：https://www.cnblogs.com/itall/p/10913599.html
文档来源：服务器之家http://www.zzvips.com/article/46525.html
页:
[1]