评论

收藏

[Linux] Linux 系统双网卡绑定配置实现

服务系统 服务系统 发布于:2021-09-17 15:24 | 阅读数:527 | 评论:0

这篇文章主要介绍了Linux 系统双网卡绑定配置实现,文中通过示例代码介绍的非常详细,对大家的学习或者工作具有一定的参考学习价值,需要的朋友们下面随着小编来一起学习学习吧
系统版本
[root@ ~]# cat /etc/redhat-release 
 
CentOS release 6.8 (Final)
 
[root@ ~]# uname -r
 
2.6.32-642.6.1.el6.x86_64
网卡说明
eth0   192.168.1.8(服务器外网卡)
eth1
eth2
两块服务器网卡(内网)
关闭防火墙
[root@ ~]# /etc/init.d/iptables stop
 
[root@ ~]# chkconfig iptables off
关闭selinux
[root@ ~]#setenforce 0 
[root@ ~]#sed -i ‘s/SELINUX=enforcing/SELINUX=disabled/‘ /etc/selinux/config
禁用NetworkManager
[root@ ~]# /etc/init.d/NetworkManager stop
 
Stopping NetworkManager daemon:    [ OK ]
 
[root@ ~]# chkconfig NetworkManager off
 
[root@ ~]# /etc/init.d/network restart
编辑eth1网卡
[root@ ~]# cd /etc/sysconfig/network-scripts/
[root@ network-scripts\]# cat >ifcfg-eth1 <<EOF
DEVICE=eth1
ONBOOT=yes
BOOTPROTO=none
USERCTL=no
MASTER=bind0
EOF
编辑eth2网卡
[root@ network-scripts]# cat >ifcfg-eth2 <<EOF  
DEVICE=eth2
ONBOOT=yes
BOOTPROTO=none
USERCTL=no
MASTER=bind0
EOF
编辑bind0网卡
[root@ network-scripts]# cat >ifcfg-bind0 <<EOF
DEVICE=bind0
TYPE=Ethernet
ONBOOT=yes
BOOTPROTO=none
IPADDR=10.0.0.8
NETMASK=255.255.255.0
GATEWAY=10.0.0.254
IPV6INIT=no
USERCTL=no
EOF
配置bond参数
[root@ network-scripts]# cat >/etc/modprobe.conf <<EOF
alias bind0 bonding
options bind0 miimon=100 mode=6
EOF
加入开机自启动(/etc/rc.local)
[root@ network-scripts]# cat >>/etc/rc.local <<EOF
 
ifenslave bind0 eth1 eth2
 
EOF
重启网络服务
[root@LVS-2 network-scripts]# service network restart
 
Shutting down interface eth0:         [ OK ]
 
Shutting down interface eth1:         [ OK ]
 
Shutting down interface eth2:         [ OK ]
 
Shutting down loopback interface:      [ OK ]
 
Bringing up loopback interface:        [ OK ]
 
Bringing up interface bind0: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
 
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
 
Determining if ip address 10.0.0.8 is already in use for device bind0..[ OK ]
 
Bringing up interface eth0: Determining if ip address 192.168.1.8 is already in use for device eth0...              [ OK ]
 
Bringing up interface eth1: RTNETLINK answers: File exists   [ OK ]
 
Bringing up interface eth2: RTNETLINK answers: File exists [ OK ]
配置使绑定立即生效
[root@LVS-2 network-scripts]# ifenslave bind0 eth1 eth2
测试联通
[root@LVS-2 network-scripts]# ping 10.0.0.8
 
PING 10.0.0.8 (10.0.0.8) 56(84) bytes of data.
 
64 bytes from 10.0.0.8: icmp_seq=1 ttl=64 time=0.089 ms
 
64 bytes from 10.0.0.8: icmp_seq=2 ttl=64 time=0.046 ms
 
^C
 
--- 10.0.0.8 ping statistics ---
 
2 packets transmitted, 2 received, 0% packet loss, time 1921ms
 
rtt min/avg/max/mdev = 0.046/0.067/0.089/0.023 ms
此时会发现系统多一个网卡
[root@LVS-2 network-scripts]# ifconfig bind0
 
bind0 
 
Link encap:Ethernet HWaddr 00:0C:29:CC:9B:5 
 
inet addr:10.0.0.8 Bcast:10.0.0.255 Mask:255.255.255.0
 
inet6 addr: fe80::20c:29ff:fecc:9b55/64 Scope:LinkUP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
 
RX packets:151 errors:0 dropped:0 overruns:0 frame:0
 
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
 
collisions:0 txqueuelen:0 
 
RX bytes:11826 (11.5 KiB) TX bytes:258 (258.0 b)
到此这篇关于Linux 系统双网卡绑定配置实现的文章就介绍到这了,更多相关Linux 双网卡绑定配置内容请搜索CodeAE代码之家以前的文章或继续浏览下面的相关文章希望大家以后多多支持CodeAE代码之家!
原文链接:https://segmentfault.com/a/1190000023033452

关注下面的标签,发现更多相似文章