CentOS 7安装Kibana7.13

Arce

下载安装包

https://artifacts.elastic.co/downloads/kibana/kibana-7.13.3-linux-x86_64.tar.gz

解压安装包

tar zxvf kibana-7.13.3-linux-x86_64.tar.gz

配置Kibana服务
主要配置以下几项：

• server.port: 5601
  
• server.host: "172.16.254.141"
  
• elasticsearch.hosts: ["http://172.16.254.141:9200"]
  
• kibana.index: ".kibana"
  
• i18n.locale: "zh-CN"

  Kibana is served by a back end server. This setting specifies the port to use.
  server.port: 5601  #kibana端口

Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
The default is 'localhost', which usually means remote machines will not be able to connect.
To allow connections from remote users, set this parameter to a non-loopback address.
server.host: "172.16.254.141"
Enables you to specify a path to mount Kibana at if you are running behind a proxy.
Use the server.rewriteBasePath setting to tell Kibana if it should remove the basePath
from requests it receives, and to prevent a deprecation warning at startup.
This setting cannot end in a slash.
#server.basePath: ""
Specifies whether Kibana should rewrite requests that are prefixed with
server.basePath or require that they are rewritten by your reverse proxy.
This setting was effectively always false before Kibana 6.3 and will
default to true starting in Kibana 7.0.
#server.rewriteBasePath: false
Specifies the public URL at which Kibana is available for end users. If
server.basePath is configured this URL should end with the same basePath.
#server.publicBaseUrl: ""
The maximum payload size in bytes for incoming server requests.
#server.maxPayload: 1048576
The Kibana server's name.  This is used for display purposes.
#server.name: "your-hostname"
The URLs of the Elasticsearch instances to use for all your queries.
#elasticsearch.hosts: ["http://localhost:9200"]
Kibana uses an index in Elasticsearch to store saved searches, visualizations and
dashboards. Kibana creates a new index if the index doesn't already exist.
#kibana.index: ".kibana"
The default application to load.
#kibana.defaultAppId: "home"
If your Elasticsearch is protected with basic authentication, these settings provide
the username and password that the Kibana server uses to perform maintenance on the Kibana
index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
is proxied through the Kibana server.
#elasticsearch.username: "kibana_system"
#elasticsearch.password: "pass"
Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
These settings enable SSL for outgoing requests from the Kibana server to the browser.
#server.ssl.enabled: false
#server.ssl.certificate: /path/to/your/server.crt
#server.ssl.key: /path/to/your/server.key
Optional settings that provide the paths to the PEM-format SSL certificate and key files.
These files are used to verify the identity of Kibana to Elasticsearch and are required when
xpack.security.http.ssl.client_authentication in Elasticsearch is set to required.
#elasticsearch.ssl.certificate: /path/to/your/client.crt
#elasticsearch.ssl.key: /path/to/your/client.key
Optional setting that enables you to specify a path to the PEM file for the certificate
authority for your Elasticsearch instance.
#elasticsearch.ssl.certificateAuthorities: [ "/path/to/your/CA.pem" ]
To disregard the validity of SSL certificates, change this setting's value to 'none'.
#elasticsearch.ssl.verificationMode: full
Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
the elasticsearch.requestTimeout setting.
#elasticsearch.pingTimeout: 1500
Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
must be a positive integer.
#elasticsearch.requestTimeout: 30000
List of Kibana client-side headers to send to Elasticsearch. To send no client-side
headers, set this value to [] (an empty list).
#elasticsearch.requestHeadersWhitelist: [ authorization ]
This setting cannot end in a slash.
#server.basePath: ""
Specifies whether Kibana should rewrite requests that are prefixed with
server.basePath or require that they are rewritten by your reverse proxy.
This setting was effectively always false before Kibana 6.3 and will
default to true starting in Kibana 7.0.
#server.rewriteBasePath: false
Specifies the public URL at which Kibana is available for end users. If
server.basePath is configured this URL should end with the same basePath.
#server.publicBaseUrl: ""
The Kibana server's name.  This is used for display purposes.
#server.name: "your-hostname"
The URLs of the Elasticsearch instances to use for all your queries.
elasticsearch.hosts: ["http://172.16.254.141:9200"]
Kibana uses an index in Elasticsearch to store saved searches, visualizations and
dashboards. Kibana creates a new index if the index doesn't already exist.
kibana.index: ".kibana"
The default application to load.
#kibana.defaultAppId: "home"
If your Elasticsearch is protected with basic authentication, these settings provide
the username and password that the Kibana server uses to perform maintenance on the Kibana
index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
is proxied through the Kibana server.
#elasticsearch.username: "kibana_system"
#elasticsearch.password: "pass"
Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
These settings enable SSL for outgoing requests from the Kibana server to the browser.
#server.ssl.enabled: false
#server.ssl.certificate: /path/to/your/server.crt
#server.ssl.key: /path/to/your/server.key
Optional settings that provide the paths to the PEM-format SSL certificate and key files.
These files are used to verify the identity of Kibana to Elasticsearch and are required when
xpack.security.http.ssl.client_authentication in Elasticsearch is set to required.
#elasticsearch.ssl.certificate: /path/to/your/client.crt
#elasticsearch.ssl.key: /path/to/your/client.key
Optional setting that enables you to specify a path to the PEM file for the certificate
authority for your Elasticsearch instance.
#elasticsearch.ssl.certificateAuthorities: [ "/path/to/your/CA.pem" ]
To disregard the validity of SSL certificates, change this setting's value to 'none'.
#elasticsearch.ssl.verificationMode: full
Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
the elasticsearch.requestTimeout setting.
#elasticsearch.pingTimeout: 1500
Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
must be a positive integer.
#elasticsearch.requestTimeout: 30000
List of Kibana client-side headers to send to Elasticsearch. To send no client-side
headers, set this value to [] (an empty list).
#elasticsearch.requestHeadersWhitelist: [ authorization ]
Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten
by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.
#elasticsearch.customHeaders: {}
Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.
#elasticsearch.shardTimeout: 30000
Logs queries sent to Elasticsearch. Requires logging.verbose set to true.
#elasticsearch.logQueries: false
Specifies the path where Kibana creates the process ID file.
#pid.file: /run/kibana/kibana.pid
Enables you to specify a file where Kibana stores log output.
#logging.dest: stdout
Set the value of this setting to true to suppress all logging output.
#logging.silent: false
Set the value of this setting to true to suppress all logging output other than error messages.
#logging.quiet: false
Set the value of this setting to true to log all events, including system usage information
and all requests.
#logging.verbose: false
Set the interval in milliseconds to sample system and process performance
metrics. Minimum is 100ms. Defaults to 5000.
#ops.interval: 5000
Specifies locale to be used for all localizable strings, dates and number formats.
Supported languages are the following: English - en , by default , Chinese - zh-CN .
i18n.locale: "zh-CN"

#### 启动kibana
<code>`language
./bin/kibana

浏览器访问
http://172.16.254.141:5601