Java源码解析HashMap成员变量

湛蓝之海

今天小编就为大家分享一篇关于Java源码解析HashMap成员变量，小编觉得内容挺不错的，现在分享给大家，具有很好的参考价值，需要的朋友一起跟随小编来看看吧
本文基于jdk1.8进行分析
关于hashmap的简介，可以参考这篇文章http://www.zzvips.com/article/174037.html。
首先看一下hashmap的一些静态常量。第一个是default_initial_capacity，默认初始大小，16。从注释中可以了解到，大小必须为2的指数。这里的16，采用的1左移4位实现。而“aka”，是as known as的缩写。

/**
 * the default initial capacity - must be a power of two.
 **/
static final int default_initial_capacity = 1 << 4; // aka 16

接下来是最大容量，当通过任何一个构造函数的参数隐式指明时使用该值。必须是2的指数，且小于等于1<<30，即2的30次方。

/**
 * the maximum capacity, used if a higher value is implicitly specified
 * by either of the constructors with arguments.
 * must be a power of two <= 1<<30.
 **/
static final int maximum_capacity = 1 << 30;

接下来是负载因子，默认值为0.75f。

/**
 * the load factor used when none specified in constructor.
 **/
static final float default_load_factor = 0.75f;

接下来是和红黑树相关的几个常量。在jdk1.8中，如果哈希表中的链表太长，就会转化为一个红黑树。
treeify_threshold，表示要转为红黑树的最小元素个数，即8。把红黑树转化为链表的门限个数是6. min_treeify_capacity为64，表示把链表转化为红黑树的最小元素个数。否则，如果太多节点在一个链表中时，哈希表会扩容，而不会转化为红黑树。

/**
 * the bin count threshold for using a tree rather than list for a
 * bin. bins are converted to trees when adding an element to a
 * bin with at least this many nodes. the value must be greater
 * than 2 and should be at least 8 to mesh with assumptions in
 * tree removal about conversion back to plain bins upon
 * shrinkage.
 **/
static final int treeify_threshold = 8;
/**
 * the bin count threshold for untreeifying a (split) bin during a
 * resize operation. should be less than treeify_threshold, and at
 * most 6 to mesh with shrinkage detection under removal.
 **/
static final int untreeify_threshold = 6;
/**
 * the smallest table capacity for which bins may be treeified.
 * (otherwise the table is resized if too many nodes in a bin.)
 * should be at least 4 * treeify_threshold to avoid conflicts
 * between resizing and treeification thresholds.
 **/
static final int min_treeify_capacity = 64;

接下来是table，它是保存hashmap的最主要的数据结构，如下图。从注释中也可以了解到，table的大小一定是2的指数。

/**
 * the table, initialized on first use, and resized as
 * necessary. when allocated, length is always a power of two.
 * (we also tolerate length zero in some operations to allow
 * bootstrapping mechanics that are currently not needed.)
 **/
transient node<k,v>[] table;

接下来是entryset，如下图。它保存缓存的映射关系集合。注意，keyset()和values()使用的是父类abstractmap的属性。

/**
 * holds cached entryset(). note that abstractmap fields are used
 * for keyset() and values().
 **/
transient set<map.entry<k,v>> entryset;

最后是一些其他的属性，包括hashmap中元素个数size，修改次数modcount，下一次进行resize的门限个数，以及负载因子loadfactor，如下图。需要注意的是，loadfactor是final的，也就是说，它一旦被赋值，就不能再修改了。

/**
 * the number of key-value mappings contained in this map.
 **/
transient int size;
/**
 * the number of times this hashmap has been structurally modified
 * structural modifications are those that change the number of mappings in
 * the hashmap or otherwise modify its internal structure (e.g.,
 * rehash). this field is used to make iterators on collection-views of
 * the hashmap fail-fast. (see concurrentmodificationexception).
 **/
transient int modcount;
/**
 * the next size value at which to resize (capacity * load factor).
 * @serial
 **/
// (the javadoc description is true upon serialization.
// additionally, if the table array has not been allocated, this
// field holds the initial array capacity, or zero signifying
// default_initial_capacity.)
int threshold;
/**
 * the load factor for the hash table.
 *
 * @serial
 **/
final float loadfactor;

this is the end.
总结
以上就是这篇文章的全部内容了，希望本文的内容对大家的学习或者工作具有一定的参考学习价值，谢谢大家对CodeAE代码之家的支持。如果你想了解更多相关内容请查看下面相关链接
原文链接：https://blog.csdn.net/li_canhui/article/details/85088659