linux动态增加LV空间的方法

飞奔的炮台

今天小编要为大家带来得是linux动态增加LV空间的方法！希望对大家会有帮助！有需要的朋友一起去看看吧
一直都说LVM可以在线增加空间，一直都没有试过
下面小试一下：
1.增加硬盘
2.创建PV
3.添加PV到VG
4.扩展LV
1.增加硬盘
该干嘛干嘛
添加后需要重启（有知道不用重启的办法吗）

--这个是新添加的硬盘  
[root@localhost ~]# fdisk -l /dev/sdb  
Disk /dev/sdb: 5368 MB, 5368709120 bytes  
255 heads, 63 sectors/track, 652 cylinders  
Units = cylinders of 16065 * 512 = 8225280 bytes  
Disk /dev/sdb doesn't contain a valid partition table

2.创建PV
--命令很简单

--命令很简单  
[root@localhost ~]# pvcreate /dev/sdb  
  Physical volume "/dev/sdb" successfully created  
  
--可以看到新的PV了  
[root@localhost ~]# pvdisplay  
  /dev/hdc: open failed: No medium found  
  --- Physical volume ---  
  PV Name         /dev/sda2  
  VG Name         VolGroup00  
  PV Size         9.90 GB / not usable 22.76 MB  
  Allocatable       yes (but full)  
  PE Size (KByte)     32768  
  Total PE        316  
  Free PE         0  
  Allocated PE      316  
  PV UUID         n5fS6M-jBiH-n9vU-pBTd-iOCv-BbTe-BUeNZo  
   
  "/dev/sdb" is a new physical volume of "5.00 GB"  
  --- NEW Physical volume ---  
  PV Name         /dev/sdb  
  VG Name         
  PV Size         5.00 GB  
  Allocatable       NO  
  PE Size (KByte)     0  
  Total PE        0  
  Free PE         0  
  Allocated PE      0  
  PV UUID         TDs3mN-3ON3-eHbl-cohr-7Hr3-8608-jiLlXG

3.添加PV到VG

--指定对应的VG和PV  
[root@localhost ~]# vgextend VolGroup00 /dev/sdb  
  Volume group "VolGroup00" successfully extended  
  
--看到新的5G添加到VG里面了，状态是没有分配  
[root@localhost ~]# vgdisplay   
  --- Volume group ---  
  VG Name         VolGroup00  
  System ID         
  Format        lvm2  
  Metadata Areas    2  
  Metadata Sequence No  4  
  VG Access       read/write  
  VG Status       resizable  
  MAX LV        0  
  Cur LV        2  
  Open LV         2  
  Max PV        0  
  Cur PV        2  
  Act PV        2  
  VG Size         14.84 GB  
  PE Size         32.00 MB  
  Total PE        475  
  Alloc PE / Size     316 / 9.88 GB  
  Free  PE / Size     159 / 4.97 GB  
  VG UUID         x1uyPD-qBgE-2yQV-T1Cb-IGIz-e4LB-fghf1W

4.扩展LV

--先添加2G练手  
[root@localhost ~]# lvextend -L +2G /dev/VolGroup00/LogVol00  
  Extending logical volume LogVol00 to 10.88 GB  
  Logical volume LogVol00 successfully resized  
--成功后还未看到新的空间  
[root@localhost ~]# df -m  
Filesystem       1M-blocks    Used Available Use% Mounted on  
/dev/mapper/VolGroup00-LogVol00  
              8804    7362     988  89% /  
--需要手动刷新  
[root@localhost ~]# resize2fs /dev/VolGroup00/LogVol00  
resize2fs 1.39 (29-May-2006)  
Filesystem at /dev/VolGroup00/LogVol00 is mounted on /; on-line resizing required  
Performing an on-line resize of /dev/VolGroup00/LogVol00 to 2850816 (4k) blocks.  
The filesystem on /dev/VolGroup00/LogVol00 is now 2850816 blocks long.  
  
--现在就完成了  
[root@localhost ~]# df -m  
Filesystem       1M-blocks    Used Available Use% Mounted on  
/dev/mapper/VolGroup00-LogVol00  
             10788    7365    2867  72% /

若需要先缩小则使用以下命令：
lvreduce -L -20G /dev/mapper/vg_mysvr-lv_home
resize2fs /dev/mapper/vg_my-lv_home
lvextend -L +20G /dev/mapper/vg_mysvr-lv_root
resize2fs /dev/mapper/vg_mysvr-lv_root