用Visual studio2012在Windows8上开发内核驱动监视进程创建

影者东升

在Windows NT中，80386保护模式的“保护”比Windows 95中更坚固，这个“镀金的笼子”更加结实，更加难以打破。在Windows 95中，至少应用程序I/O操作是不受限制的，而在Windows NT中，我们的应用程序连这点权限都被剥夺了。在NT中几乎不太可能进入真正的ring0层。 
在Windows NT中，存在三种Device Driver：
1．“Virtual device Driver” (VDD)。通过VDD，16位应用程序，如DOS 和Win16应用程序可以访问特定的I/O端口（注意，不是直接访问，而是要通过VDD来实现访问）。
2．“GDI Driver”，提供显示和打印所需的GDI函数。
3．“Kernel Mode Driver”，实现对特定硬件的操作，比如说CreateFile, CloseHandle (对于文件对象而言), ReadFile, WriteFile, DeviceIoControl 等操作。“Kernel Mode Driver”还是Windows NT中唯一可以对硬件中断和DMA进行操作的Driver。SCSI 小端口驱动和 网卡NDIS 驱动都是Kernel Mode Driver的一种特殊形式。
Visual studio2012与Windows8带来格外不同的新体验
1.启动Vs2012

2.看见满目的驱动开发模板

3.选择一个驱动模式，有内核模式与用户模式两种的驱动

4.创建一个驱动程序，KMDF DriverMVP

5.我们选择的是内核模式的驱动程序，下面是创建成功后的界面，分别是驱动程序本身，与驱动安装包

6.按下F5，选择驱动编译，

插入下列代码实现内核的进程创建

#include "ProcMon.h"
#include "../inc/ioctls.h"
//
//
//
//
// 全局变量
//
PDEVICE_OBJECTg_pDeviceObject;
//
//
//
//
// 函数实现
//
NTSTATUS
DriverEntry(
IN PDRIVER_OBJECTDriverObject,
IN PUNICODE_STRINGRegistryPath
)
{
NTSTATUSStatus = STATUS_SUCCESS;  
UNICODE_STRINGntDeviceName;
UNICODE_STRINGdosDeviceName;
UNICODE_STRINGProcessEventString;
PDEVICE_EXTENSIONdeviceExtension;
PDEVICE_OBJECTdeviceObject = NULL;
KdPrint(("[ProcMon] DriverEntry: %wZ\n", RegistryPath));
//
// 创建设备对象
//
RtlInitUnicodeString(&ntDeviceName, PROCMON_DEVICE_NAME_W);
Status = IoCreateDevice(
DriverObject, 
sizeof(DEVICE_EXTENSION),// DeviceExtensionSize
&ntDeviceName,// DeviceName
FILE_DEVICE_PROCMON,// DeviceType
0,// DeviceCharacteristics
TRUE,// Exclusive
&deviceObject// [OUT]
);
if(!NT_SUCCESS(Status))
{
KdPrint(("[ProcMon] IoCreateDevice Error Code = 0x%X\n", Status));
return Status;
}
//
// 设置扩展结构
//
deviceExtension = (PDEVICE_EXTENSION)deviceObject->DeviceExtension;
//
// Set up synchronization objects, state info,, etc.
//
deviceObject->Flags |= DO_BUFFERED_IO;
//
// 创建符号链接
//
RtlInitUnicodeString(&dosDeviceName, PROCMON_DOS_DEVICE_NAME_W);
Status = IoCreateSymbolicLink(&dosDeviceName, &ntDeviceName);
if(!NT_SUCCESS(Status))
{
KdPrint(("[ProcMon] IoCreateSymbolicLink Error Code = 0x%X\n", Status));
IoDeleteDevice(deviceObject);
return Status;
}
//
// 分发IRP
//
DriverObject->MajorFunction[IRP_MJ_CREATE]= ProcmonDispatchCreate;
DriverObject->MajorFunction[IRP_MJ_CLOSE]= ProcmonDispatchClose;
DriverObject->MajorFunction[IRP_MJ_DEVICE_CONTROL]= ProcmonDispatchDeviceControl;
DriverObject->DriverUnload= ProcmonUnload;
//
// 保存设备对象指针
//
g_pDeviceObject = deviceObject;
//
// 创建事件对象与应用层通信
//
RtlInitUnicodeString(&ProcessEventString, EVENT_NAME);
deviceExtension->ProcessEvent = IoCreateNotificationEvent(&ProcessEventString, &deviceExtension->hProcessHandle);
KeClearEvent(deviceExtension->ProcessEvent);// 非受信状态
//
// 设置回调例程
//
Status = PsSetCreateProcessNotifyRoutine(ProcessCallback, FALSE);
return Status;
}
NTSTATUS
ProcmonDispatchCreate(
IN PDEVICE_OBJECTDeviceObject,
IN PIRPIrp
)
{
NTSTATUS Status = STATUS_SUCCESS;
Irp->IoStatus.Information = 0;
KdPrint(("[ProcMon] IRP_MJ_CREATE\n"));
Irp->IoStatus.Status = Status;
IoCompleteRequest(Irp, IO_NO_INCREMENT);
return Status;
}
NTSTATUS
ProcmonDispatchClose(
IN PDEVICE_OBJECTDeviceObject,
IN PIRPIrp
)
{
NTSTATUS Status = STATUS_SUCCESS;
Irp->IoStatus.Information = 0;
KdPrint(("[ProcMon] IRP_MJ_CLOSE\n"));
Irp->IoStatus.Status = Status;
IoCompleteRequest(Irp, IO_NO_INCREMENT);
return Status;
}
NTSTATUS
ProcmonDispatchDeviceControl(
IN PDEVICE_OBJECTDeviceObject,
IN PIRPIrp
)
{
NTSTATUSStatus = STATUS_SUCCESS;
PIO_STACK_LOCATIONirpStack;
PDEVICE_EXTENSIONdeviceExtension;
ULONGinBufLength, outBufLength;
ULONGioControlCode;
PCALLBACK_INFOpCallbackInfo;
// 获取当前设备栈
irpStack = IoGetCurrentIrpStackLocation(Irp);
deviceExtension = (PDEVICE_EXTENSION)DeviceObject->DeviceExtension;
// 提取信息
pCallbackInfo = Irp->AssociatedIrp.SystemBuffer;
inBufLength = irpStack->Parameters.DeviceIoControl.InputBufferLength;
outBufLength = irpStack->Parameters.DeviceIoControl.OutputBufferLength;
ioControlCode = irpStack->Parameters.DeviceIoControl.IoControlCode;
// 处理不同的IOCTL
switch (ioControlCode)
{
case IOCTL_PROC_MON:
{
KdPrint(("[ProcMon] IOCTL: 0x%X", ioControlCode));
if (outBufLength >= sizeof(PCALLBACK_INFO))
{
pCallbackInfo->hParentId = deviceExtension->hParentId;
pCallbackInfo->hProcessId = deviceExtension->hProcessId;
pCallbackInfo->bCreate = deviceExtension->bCreate;
Irp->IoStatus.Information = outBufLength;
} 
break;
}
default:
{
Status = STATUS_INVALID_PARAMETER;
Irp->IoStatus.Information = 0;
KdPrint(("[ProcMon] Unknown IOCTL: 0x%X (%04X,%04X)", \
ioControlCode, DEVICE_TYPE_FROM_CTL_CODE(ioControlCode), \
IoGetFunctionCodeFromCtlCode(ioControlCode)));
break;
}
}
Irp->IoStatus.Status = Status;
IoCompleteRequest(Irp, IO_NO_INCREMENT);
return Status;
}
VOID
ProcmonUnload(
IN PDRIVER_OBJECTDriverObject
)
{
UNICODE_STRING dosDeviceName;
//
// Free any resources
//
// 卸载回调例程
PsSetCreateProcessNotifyRoutine(ProcessCallback, TRUE);
//
// Delete the symbolic link
//
RtlInitUnicodeString(&dosDeviceName, PROCMON_DOS_DEVICE_NAME_W);
IoDeleteSymbolicLink(&dosDeviceName);
//
// Delete the device object
//
IoDeleteDevice(DriverObject->DeviceObject);
KdPrint(("[ProcMon] Unloaded"));
}
VOID
ProcessCallback(
IN HANDLEParentId,// 父进程ID
IN HANDLEProcessId,// 发生事件的进程ID
IN BOOLEANCreate// 进程是创建还是终止
)
{
PDEVICE_EXTENSION deviceExtension = (PDEVICE_EXTENSION)g_pDeviceObject->DeviceExtension;
deviceExtension->hParentId = ParentId;
deviceExtension->hProcessId = ProcessId;
deviceExtension->bCreate = Create;
// 触发事件，通知应用程序
KeSetEvent(deviceExtension->ProcessEvent, 0, FALSE);
KeClearEvent(deviceExtension->ProcessEvent);
}
//
//

ring3实现应用层的调用，搞定进程创建的监视

#include "windows.h"
#include "winioctl.h"
#include "stdio.h"
#include "../inc/ioctls.h"
#define SYMBOL_LINK "\\\\.\\ProcMon"
//#define SYMBOL_LINK "\\\\.\\slNTProcDrv"
int main()
{
CALLBACK_INFO cbkinfo, cbktemp = {0};
// 打开驱动设备对象
HANDLE hDriver = ::CreateFile(
SYMBOL_LINK,
GENERIC_READ | GENERIC_WRITE,
0,
NULL,
OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL,
NULL);
if (hDriver == INVALID_HANDLE_VALUE)
{
printf("打开驱动设备对象失败！\n");
return -1;
}
// 打开内核事件对象
HANDLE hProcessEvent = ::OpenEventW(SYNCHRONIZE, FALSE, EVENT_NAME);
while (::WaitForSingleObject(hProcessEvent, INFINITE))
{
DWORDdwRet;
BOOLbRet;
bRet = ::DeviceIoControl(
hDriver,
IOCTL_PROC_MON,
NULL,
0,
&cbkinfo,
sizeof(cbkinfo),
&dwRet,
NULL);
if (bRet)
{
if (cbkinfo.hParentId != cbktemp.hParentId || \
cbkinfo.hProcessId != cbktemp.hProcessId || \
cbkinfo.bCreate != cbktemp.bCreate)
{
if (cbkinfo.bCreate)
{
printf("有进程被创建，PID = %d\n", cbkinfo.hProcessId);
} 
else
{
printf("有进程被终止，PID = %d\n", cbkinfo.hProcessId);
}
cbktemp = cbkinfo;
}
} 
else
{
printf("\n获取进程信息失败！\n");
break;
}
}
::CloseHandle(hDriver);
return 0;
}